Enhancing Vehicle Performance: Transmission Coolers and Evil Energy Catch Cans

Introduction

For car enthusiasts and performance-driven drivers, maintaining their vehicles’ optimal performance and longevity is crucial. Two key components that can significantly enhance a vehicle’s performance and longevity are the transmission cooler and the catch can, particularly from the reputable brand Evil Energy. This article will explore the importance, benefits, and installation tips for the transmission cooler and the Evil Energy catch can.

Transmission Cooler

What is a Transmission Cooler?

A transmission cooler is an auxiliary device designed to cool the transmission fluid in a vehicle. This cooling process is essential because it helps maintain the optimal operating temperature of the transmission, preventing overheating and ensuring efficient performance. Transmission coolers are especially beneficial for vehicles that undergo heavy towing, performance driving, or extended periods of high-speed driving.

The Importance of Transmission Cooling

• Preventing Overheating: Transmission fluid plays a vital role in lubricating and cooling the transmission components. However, during strenuous driving conditions, the transmission fluid can heat up, leading to overheating and potential damage to the transmission.
• Enhancing Performance: The transmission cooler maintains the transmission fluid at an optimal temperature, ensuring smooth and efficient gear shifting and improving the vehicle’s overall performance.
• Extending Transmission Life: Overheating can cause the transmission fluid to break down, leading to increased wear and tear on the transmission components. A transmission cooler helps preserve the fluid’s quality, extending the transmission’s lifespan.

Types of Transmission Coolers

• Tube and Fin Coolers: These coolers feature tubes surrounded by fins. The transmission fluid flows through the tubes, and the fins help dissipate heat. Tube and fin coolers are compact and cost-effective but may not be as efficient as other types.
• Plate and Fin Coolers: These coolers use stacked plates with fins between them to increase the surface area for heat dissipation. They are more efficient than tube and fin coolers and are often preferred for performance applications.
• Stacked Plate Coolers: These coolers are similar to plate and fin coolers but use larger plates, providing even greater cooling efficiency. They are highly efficient and ideal for heavy-duty and high-performance vehicles.

Benefits of Installing a Transmission Cooler

1. Improved Transmission Performance: By keeping the transmission fluid cool, the cooler ensures smoother and more efficient gear shifts, enhancing overall vehicle performance.
2. Increased Transmission Lifespan: A transmission cooler reduces wear and tear on the components by preventing overheating and fluid breakdown, extending the transmission’s lifespan.
3. Enhanced Towing Capacity: Vehicles used for towing heavy loads benefit significantly from a transmission cooler, as it helps manage the increased heat generated during towing, ensuring reliable performance.
4. Cost Savings: A transmission cooler can save money on maintenance and repairs in the long run by reducing the risk of transmission failure and the need for repairs.

Installation Tips for Transmission Coolers

• Choose the Right Cooler: Select a transmission cooler appropriate for your vehicle and driving conditions. Consider factors such as the cooler’s size, type, and cooling capacity.
• Locate an Ideal Mounting Position: The transmission cooler should be mounted in a location that allows for adequate airflow, such as in front of the radiator or air conditioning condenser.
• Use Quality Hoses and Fittings: Ensure that the hoses and fittings used for the installation are high quality and compatible with your vehicle’s transmission system.
• Follow Manufacturer Instructions: Carefully follow the installation instructions provided by the transmission cooler manufacturer to ensure a proper and secure installation.
• Regularly Check for Leaks: After installation, periodically inspect the transmission cooler and connections for any signs of leaks or damage.

Evil Energy Catch Can

What is a Catch Can?

A catch can, also known as an oil catch can, is a device installed in a vehicle’s PCV (Positive Crankcase Ventilation) system. Its primary function is to capture and separate oil vapors and other contaminants from crankcase gases before they are recirculated into the intake manifold. This prevents the buildup of oil and contaminants in the intake system, ensuring a cleaner and more efficient engine operation.

The Role of the PCV System

The PCV system is designed to ventilate and release gases produced during the combustion process from the crankcase. In a factory setup, these gases are recirculated back into the intake system to be burned off. While this helps reduce emissions, it can also lead to oil accumulation and contaminants in the intake system.

Benefits of an Evil Energy Catch Can

1. Prevents Carbon Buildup: By capturing oil vapors and contaminants, the catch can prevent carbon buildup on the intake valves and other engine components, ensuring cleaner and more efficient engine operation.
2. Improved Engine Performance: A cleaner intake system leads to better combustion, improving engine performance and efficiency.
3. Reduced Maintenance: The catch can reduce the need for frequent cleaning and maintenance by preventing the buildup of oil and contaminants in the intake system.
4. Extended Engine Life: The catch can help reduce wear and tear on engine components by ensuring a cleaner combustion process, extending the engine’s overall lifespan.

Features of Evil Energy Catch Cans

• High-Quality Construction: Evil Energy catch cans are made from durable materials such as aluminum, ensuring longevity and resistance to corrosion.
• Efficient Filtration: The catch cans feature effective filtration systems that efficiently separate oil vapors and contaminants from the crankcase gases.
• Easy Installation: Evil Energy catch cans are designed for easy installation and have all the necessary fittings and hardware.
• Universal Fitment: These catch cans are compatible with various vehicles, making them a versatile solution for multiple applications.

Installation Tips for Evil Energy Catch Can

1. Choose the Right Location: Select a location for the catch can that is easily accessible for maintenance and inspection. Ensure it is securely mounted to prevent movement during vehicle operation.
2. Use Quality Hoses and Clamps: Ensure that the hoses and clamps used for the installation are high quality and compatible with your vehicle’s PCV system.
3. Follow Manufacturer Instructions: Carefully follow Evil Energy’s installation instructions to ensure a proper and secure installation.
4. Regularly Empty the Catch Can: Periodically check and empty the catch can to ensure it continues to function effectively.
5. Inspect for Leaks: After installation, regularly inspect the catch can and connections for any signs of leaks or damage.

Conclusion

The transmission cooler and the Evil Energy catch can be valuable additions to any vehicle, enhancing performance, efficiency, and longevity. The transmission cooler prevents overheating and ensures smooth and efficient transmission operation. At the same time, the Evil Energy catch can capture oil vapors and contaminants, keeping the intake system clean and improving engine performance.

By carefully selecting and properly installing these components, drivers can enjoy improved vehicle performance, reduced maintenance costs, and extended component lifespans. Whether you are a car enthusiast seeking to optimize your vehicle’s performance or a professional looking for reliable and efficient solutions, the transmission cooler and Evil Energy catch can be excellent investments for your vehicle’s future.